Firmware HP Color Laser 179FNW
Sold 21
Refunds 0
Good feedbacks 0
Bad feedbacks 0
After flashing your printer, you no longer need to buy chips when refueling !!!!!
The firmware is carried out via USB without soldering the board. It takes about 5-10 minutes.
V3.82.01.01 | V3.82.01.02 | V3.82.01.06 | V3.82.01.07 (our firmware is 100% suitable for any version)
IMPORTANT! V3.82.01.11 - not flashed via USB
More about the problem - https://t.me/tradenixcom/15
More about the solution - https://tradenix.com.ua/g104362658-ponizhenie-versii-proshivki
All information on printing reports, firmware, modes on the link - https://tradenix.com/manuals/614
The answer to the most frequent question! When will I receive the firmware? The firmware is usually sent within 10 minutes after payment, more rarely within an hour.
The firmware is carried out via USB without soldering the board. It takes about 5-10 minutes.
V3.82.01.01 | V3.82.01.02 | V3.82.01.06 | V3.82.01.07 (our firmware is 100% suitable for any version)
IMPORTANT! V3.82.01.11 - not flashed via USB
More about the problem - https://t.me/tradenixcom/15
More about the solution - https://tradenix.com.ua/g104362658-ponizhenie-versii-proshivki
All information on printing reports, firmware, modes on the link - https://tradenix.com/manuals/614
The answer to the most frequent question! When will I receive the firmware? The firmware is usually sent within 10 minutes after payment, more rarely within an hour.